V6

• Set of hull, deck and mast hatch. Is laid up in fibre glass/epoxi (3 layers, 25, 162 y 150 grams) and painted directly in mould with a 2 component polyurethane paint. Fin box glued in position.

(foto-kit-6-1)

V7

• Set of hull, deck and drum hatch. Is laid up in fibre glass/epoxi (3 layers, 25, 162 y 150 grams) and painted directly in mould with a 2 component polyurethane paint. Fin box glued in position.

(foto-kit-7-1)

• Jib Tube. Attachments for headsail swivel three positions inox.Laid up in fibre glass/epoxi (3 layers of 200 grams).

(foto-kit-7-2)

• Shrouds stay reinforcement (1+1). Shrouds stay reinforcement 3 positions Laid up in fibre glass/epoxi (3 layers of 200 grams).

(foto-kit-7-3)

• Hatch top no pot. Hatch top no pot (for arm sail servo). Laid up in fibre glass/epoxi (3 layers of 25,162 and 150 grams) and painted directly in mould with a 2 component polyurethane paint.

(foto-kit-7-4)

Rudders

• V6 Std. V6 Rudder with 4mm. dia. ss stock. 6 % t/c.Laid up in carbon/epoxi (200 grams) and painted directly in mould with a component polyurethane paint.

• V7 Std. V7 Rudder with 4mm. dia. ss stock. 6.5% t/c.Laid up in carbon/epoxi (200 grams) and painted directly in mould with a 2 component polyurethane paint.

• V7 Tube. Timón V7 con eje tubular en Inox. diam. 4 exterior, 3 interior (más ligero). Perfil 6.5% t/c realizado en fibra de carbono/epoxy (200 gr.) y pintado directamente en molde con Poliuretano 2C.

(foto-Rud-7-1)

Fins

• V7/V6. Fin V6/V7, 5.85% t/c section. Laid up in carbon/epoxi (2 layers of 125 grams UD, 1 layer 200 gr. PW) and painted directly in mould with a 2 component polyurethane paint.

Ballast

• V7/V6. Ballast casted in lead with 6% of Antimony.It is supplied in cast state.

Bow boompers

• V6. Moulded in a 2 component Silicon.

(foto-bow-6)

• V7. Moulded in a 2 component Silicon.